ASK AN EXPERTDescription
- Synthetic inserts for 'Signature' rings only
- Can be used in the rear or whatever combination is needed
- Can be used to move the scope tube in any direction needed for windage and/or elevation
- Material: Plastic
These offset inserts work only in Burris Signature Rings.
One insert half is slightly thicker and the other slightly thinner than standard.
Swapping the standard inserts with a pair of offset inserts will move the point of impact approximately 10" for the .010.
This will allow a gun to be sighted in that cannot be zeroed with the available windage and elevation adjustments in the scope.
For serious shooters, the optional offset inserts allow a scope to be brought almost to complete zero, then using the windage and elevation adjustments only for the final, fine adjustment.
This keeps the erector tube centered in the scope for improved scope clarity and performance.
One insert half is slightly thicker and the other slightly thinner than standard.
Swapping the standard inserts with a pair of offset inserts will move the point of impact approximately 10" for the .010.
This will allow a gun to be sighted in that cannot be zeroed with the available windage and elevation adjustments in the scope.
For serious shooters, the optional offset inserts allow a scope to be brought almost to complete zero, then using the windage and elevation adjustments only for the final, fine adjustment.
This keeps the erector tube centered in the scope for improved scope clarity and performance.
