Optics

All Steel 30mm RingsSecured with A.R.M.S. dovetail system to an extruded aluminum platformBuilt in no mar Patented Buffer PadsHeight: .925" (Measured from the center of the optic to the base)Black Finish The A.R.M.S. #22 Low Rings are all steel...

Raises the optic 1 1/2"See-thru channelU.S. Patent No. 5276988 & 7493721100% Made in the USABlack Finish

Picatinny Rail MountQK01 Aluminum Quick KnobLocks unit into fixed elevation3.75" - 4.65" Elevation RangeWeight: 7.4 ozMade in the USA The BT12-QK is our standard height Precision Rail Monopod (PRM) with QK01 Quick Knob. Attaches to standard 1913...

Easily installed to V8, PSR or CAL model Atlas BipodProvide an additional 3 inches of elevationSold as a pair The ACCUSHOT Atlas 3in Leg Extensions (BT22) are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless steel...

Independent, intentional and non-orientated leg positioning allows either hand to move leg into any of the five leg positionsSolid leg positions allows shooter to load the bipod at the 45 and 90 degree positionsNon-orientated leg length adjustment done...

Construction from T6061 Aluminum, Hard Anodized black; Stainless steel springs and fastenersPicatinny Rail Mount interface by either standard machine screw fastener based clamp or optional ADM 170-S lever mountNon orientated leg positioning use either...

Construction from T6061 Aluminum, Hard Anodized black; Stainless steel springs and fastenersPicatinny Rail Mount interface by either standard machine screw fastener based clamp or optional ADM 170-S lever mountNon orientated leg positioning use either...

Easily installed with the press of a stainless steel plungerThe Spikes deliver a singularly aggressive foot to support the bipodThe Spike portion is approximately 1.45" long with the largest OD of approximately 1"Available in raw Stainless with black...

Height Range: 4.75-9.0" (6.64" at 90 degrees)Cant: 45 degreesPosition Button 0.5" diameter5 leg positions: 0, 45, 90, 135 & 180 degreesNon-Rotating Legs: outer leg does not rotate around inner legLarger, stronger inner legsWeight: 14.57 ouncesFootprint:...

Height Range: 6 - 12.3" (8.1" at 90 degrees)Preloaded Cant: 45 degreesPosition Button 0.5" diameter5 leg positions: 0, 45, 90, 135 & 180 degreesNon-Rotating Legs: outer leg does not rotate around inner legLarger, stronger inner legsWeight: 14.2...

Elevation Range: 5.70 - 6.85"Folded Length: 5.95" approximateWeight: 9.0 ounces The ACCUSHOT BT06-QK is their extended height Sling Stud Mount with QK03 Quick Knob. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is...

Picatinny Rail MountQK02 Aluminum Quick KnobLocks unit into fixed elevation4.75" - 5.65" Elevation RangeWeight: 8.3 ozMade in the USA The BT13-Qk is our mid-height Precision Rail Monopod (PRM) with QK02 Quick Knob. Attaches to standard 1913 Picatinny...

Elevation Range: 5.65 - 6.60"Folded Length: 5.80" approximateWeight: 9.0 ounces The ACCUSHOT Precision Rail Monopod (BT31-QK) features push button deployment and retraction for fast and easy setup of the hardest shots, and a bonus quick knob so you can...

UHMW components used for smooth tracking15 degrees +/- of preloaded Pan; 15 degrees +/- of preloaded CantPreload on Pan and Cant can be tightened by means of the knurled knobPicatinny Rail Mount interface by either standard machine screw fastener based...

Height Range: 7-13" (8.28" at 90 degrees)Preloaded Pan: 30 degreesPreloaded Cant: 30 degreesPosition Button 0.5" diameterFore and Aft pivot limiting Bosses5 leg positions: 0, 45, 90, 135 & 180 degreesNon-Rotating Legs: outer leg does not rotate around...

UHMW components used for smooth tracking15 degrees +/- of preloaded Pan; 15 degrees +/- of preloaded CantPreload on Pan and Cant can be tightened by means of the knurled knobConstruction from T6061 Aluminum, Hard Anodized black; Stainless steel springs...

Stud Mount for Railless StocksQK01 Alumnum Quick KnobLocks unit into fixed elevation3.75" - 4.85" Elevation RangeWeight: 7.3 ozMade in the USA The BT04-QK is our standard height Sling Stud Mount with QK01 Quick Knob. Additional Thumbnut installed to...

6061 T6 extruded aluminum constructionFor AR type upper receiversRecommended Screw Torque: 15-25 Inch PoundsMade in the USA

1in Tube SizeAnodized Black Finish Ultralight 1" SPR Scope Mount features a rear ring that is pushed forward 2", resulting in better eye relief. This scope mount is designed to fit upper receivers with Mil-Spec 1913 Picatinny rails and features a...

6061 T6 extruded aluminum constructionFor AR type upper receiversRecommended Screw Torque: 15-25 Inch PoundsAttachment Type: 3x CrossboltTop Caps: 4 Screw - Side MountMade in the USA

6061 T6 extruded aluminum constructionRecommended Screw Torque: 15-25 Inch PoundsMade in the USA

6061 T6 extruded aluminum constructionFor AR type upper receiversRecommended Screw Torque: 15-25 Inch PoundsMade in the USA

6061 T6 extruded aluminum constructionFor AR type upper receiversRecommended Screw Torque: 15-25 Inch PoundsAttachment Type: 3x CrossboltTop Caps: 4 Screw - Side MountMade in the USA

6061-T6 extruded aluminum constructionExtended scope mount profileDesigned for AR type upper receiversScrew Torque: 15 in-lbsAnodized Black Finish Featuring a rigid, lightweight design, the AERO PRECISION Ultralight 34mm Extended Scope Mount...

6061-T6 extruded aluminum constructionSPR scope mount profileDesigned for AR type upper receiversScrew Torque - 15 in-lbsAnodized Black Finish The AERO PRECISION Ultralight 34mm SPR Scope Mount (APRA211311) features a rear ring that is pushed forward...

Aircraft grade aluminum bodyFog proof and shock-resistant housingCoated lens provides superior light transmission, resolution and scratch resistanceDual-illuminated (Red & Green) reticle with adjustable rheostat for brightness controlIntegrated Picatinny...

Aircraft grade aluminum bodyDual-illuminated (Red & Green) reticle with adjustable rheostat for brightness control4 reticle patterns for accurate targeting in any shooting conditionLightweight / compact design24mm x 34mm window for ultra-fast target...

Milled from one solid piece of aircraft grade aluminum to withstand constant heavy recoilFog proof and shock-resistant housingNitrogen charged with weather resistant sealsBlue fused multi-coated lens provides superior light transmission, resolution and...

Precision machined from 6061 T6 AluminumHard coat anodized for a lifetime of performanceFully adjustable to fit both in spec and out of spec rail systemsFeatures the Patented QD Auto Lock™ Lever systemDoes not require proprietary tools for adjustmentMade...

Precision machined from 6061 T6 AluminumHard coat anodized for a lifetime of performanceFully adjustable to fit both in spec and out of spec rail systemsPatented QD Auto Lock Lever systemDoes not require proprietary tools for adjustmentCan be adjusted...

Steel Front and Rear SightsGlock Suppressor/Optic HeightFits All Glocks Except 42/43 The AMERIGLO Glock (Except 42/43) Tall Suppressor Height Front/Rear Sight Set brings a clear advantage to your shooting experience on and off the range. The Tall...

Green Fiber115" Wide Front150" NotchBlack Classic RearFits Glock 17, 19, 22, 23, 24, 26, 27, 33, 34, 35, 37, 38, 39 Upgrade your Glock with the AMERIGLO Glock 17,19,22,23,24,26,27,33,34,35,37,38,39 Green Fiber Front Black Rear Sight Set...

Green tritium lamp with a luminescent outline front sightRound notch, serrated steel rear sightDesigned with large, highly visible front and for rapid sight acquisition The AMERIGLO Glock 42/43 Front/Rear Night Sight Set is designed with large, highly...

Green tritium lamp, square outline front and painted (non tritium) bar rearDesigned with large, highly visible front and for rapid sight acquisitionPaint bar on rear is horizontal under notchT-CAP variants have a thinner front for increased target...

Green tritium lamp, square outline front and painted (non tritium) bar rearDesigned with large, highly visible front and for rapid sight acquisitionPaint bar on rear is horizontal under notchThin front is standard on Glock 42,43 to accomodate smaller...

Green tritium lamp, square outline front and painted (non tritium) bar rearDesigned with large, highly visible front and for rapid sight acquisitionPaint bar on rear is horizontal under notchThin front is standard on Glock 42,43 to accomodate smaller...

Green tritium lamp, white outline front and two tritium lamp, white outline rearTall set available for suppressor or optic useClassic 3-dot designVisible under all lighting conditionsFor Glock 42,43Black Finish

Serrated front and flat rearNitride treated alloy steel has low glareDeveloped in conjunction with decorated combat veteran, Kyle DefoorRugged, simple and well madeDesigned for speed and accuracy with a serrated front sight bladePerfect width rear notch...

Fits Glock 20, 21, 29, 30, 31, 32, 36, 40, 41Red FiberBlack Classic Rear115" Wide Front150" Notch Sight set with fiber front and flat black steel rear for Glocks. Fiberoptic elements concentrate ambient light and are ideal for bright environments.

Green tritium lamp front and large aperature two tritium lamp rearDesigned for alternative overall sight acquisition compared to traditional notched sightsFor Glock 17,19,22,23,24,26,27,33,34,35,37,38,39Black Finish