ASK AN EXPERTDescription
- Fits Savage Shortened 220 Slug Gun. Does NOT fit the 212.
- Machined from Domestic 6061 T6 Extruded Aluminum
- Mounting Hardware: Hex head screws and wrench provided
- The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger
- Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories
- The channel in the center reduces the overall mass of the mount
- Picatinny-style base that compatible with Picatinny or Weaver scope rings
- Matte Black Finish
- Comes with a bevel on both sides that making it ambidextrous
Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black
Mounting Hardware: #6 T-10 Screws and T-10 Bit Included
Center Spread: 4.630"
Overall Length: 6.850"
The middle spread is the distance between the two middle holes, center to center, on your receiver.
This mount is available in 0 MOA.
We took our Long Action mount and shortened it to allow for the use of a shotgun scope.
This should alleviate issues with the bell hitting the front of the scope mount on the regular Savage Long Action Scope Mount.
EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
Add EGW's Practical or HD Scope Rings to make it a complete overhaul!
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
Installation:
EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
Finish: Matte Black
Mounting Hardware: #6 T-10 Screws and T-10 Bit Included
Center Spread: 4.630"
Overall Length: 6.850"
The middle spread is the distance between the two middle holes, center to center, on your receiver.
This mount is available in 0 MOA.
We took our Long Action mount and shortened it to allow for the use of a shotgun scope.
This should alleviate issues with the bell hitting the front of the scope mount on the regular Savage Long Action Scope Mount.
EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
Add EGW's Practical or HD Scope Rings to make it a complete overhaul!
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
Installation:
EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
Warranty Information
| Center Spread, in | 4.63" |
| Overall Length, in | 6.85" |
| Forward Cant | 0 MOA |
