Description
- One Piece Picatinny Rail
- Domestic 6061 T6 Extruded Aluminum Construction
- Matte Black Anodized Finish
- #6-48 X 1/4 Screws and T-10 Bit Included
The EVOLUTION GUN WORKS Picatinny Rail Scope Mount comes standard with a bevel on both sides making it ambidextrous.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW's one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
Installation: EGW recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
EGW recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards
When zeroing your rifle with a 20 MOA mount, EGW recommend zeroing at 200 yards.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Warranty Information
| Fits | Ruger American Long Action Models Ruger American Standard (In Long Action Calibers) Ruger American Magnum Ruger American Go Wild Camo (In Long Action Calibers) |
| Minute Of Angle (MOA) | 0 MOA |
| Center Spread, in | 3.538" |
| Overall Length, in | 7.064" |
| Height, in | .4" (Top of Receiver to Top of Picatinny) |
| Weight, oz | 2 |
| Quick Disconnect Ring Compatible | No |
| Ambidextrous | Yes |
| Torque Specs | 20 in/lbs |
