EVOLUTION GUN WORKS T/C Venture Long Action 0 MOA Picatinny Scope Mount (46910)

Make sure you have a solid base for your scope to mount on with the EVOLUTION GUN WORKS Picatinny Rail Scope Mount.

This mount fits:
Thompson Center Venture Long Action
Thompson Center Compass Long Action (the mount may overhang on the rear of the Compass)

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Their one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.

EGW machine these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

Installation: EGW recommend 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).

EGW recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, EGW recommend zeroing at 200 yards.

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.