ASK AN EXPERTDescription
- 7075 Aluminum Connstruction
- Hardcoat Anodized Type III Finish
- (2) 6-32 Button Head Screws
The�EVOLUTION GUN WORKS Holosun K Series (fits Vortex Defender, Shield RMSC/RMS/SMS, Leupold DeltaPoint Pro) Mount for Walther PPQ M2�is made of 7075 Aluminum and has Matte Black Hardcoat finish. The red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions:
- Remove the rear sight
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) - Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
Warranty Information
| Fits | Walther PPQ Classic (M1) Walther PPQ M2 (All models except optics ready and .22LR) Walther PPQ 45 Walther PPQ 45 SD Walther PPQ Sub Compact Walther P99 (All Models) Walther PPX (All Models) Walther Creed Walther Creed 10 Round Walther PPS (All Models) Walther PPS M2 (All Models) This mount does not fit Walther PPQ 22 Walther PPQ Q4 Tac (optics ready) Walther Q5 Match (optics ready) Walther Q5 Match SF Arabesque Walther Q5 Match SF Patriot Walther Q5 Match SF Black Diamond Walther Q5 Match SF Match Black Tie Walther P2 |
| Material | 7075 Aluminum |
| Coating | Matte Black Hardcoat |
| Overall Length, in | 1.604" |
| Overall Width, in | .99" |
| Mounting Hardware | (2) 6-32 Button Head Screws |
| Red Dot Fitment | Vortex Defender Series Bushnell RXS-100 Crimson Trace CTS-1500 Holosun 407K* Holosun 407k-GR Holosun 507K* Holosun 507k-GR Holosun EPS-GR* Holosun EPS-RD* Holosun EPS-Carry-GR* Holosun EPS-Carry-RD* Jpoint Leupold Delta Point Pro Optima Redfield Accelerator Shield RMS Shield RMSc Shield SMS Sig Romeo Zero *For this mount to work with the Holosun 407K and 507K, the rear pins on the mount MUST be removed by milling or filing |
