Description
- 7075 Aluminum Construction
- Matte Black Hardcoat
- (2) 6-32 Button Head Screws
The EVOLUTION GUN WORKS Leupold DeltaPoint Pro Mount is made of 7075 Aluminum and has Matte Black Hardcoat finish. The red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
This mount fits: Colt Anaconda (fits 2020 and newer models) Colt Python (fits 2020 and newer models if the second screw hole is drilled and tapped in the top strap) Torque 6-40 x 3/8 mounting screw to 20 in/lbs Torque 4-48 x 3/8 mounting screw to 10 in/lbs Torque 6-32 red dot mounting screws to 15 in/lbs
Some newer Pythons are only drilled and tapped for one screw on the top strap, if your gun only has one hole on the top strap, this mount WILL NOT WORK.Red Dot Fitment: Vortex Defender Series (Defender XL requires the screws provided by Vortex); Vortex Venom (Enclosed Red Dot); OSight SE; Bushnell RXS-100; Crimson Trace CTS-1500; Holosun 407K*; Holosun 407k-GR; Holosun 507K*; Holosun 507k-GR; Holosun EPS-GR*; Holosun EPS-RD*; Holosun EPS-Carry-GR*; Holosun EPS-Carry-RD*; Jpoint; Leupold Delta Point Pro; Optima; Redfield Accelerator; Shield RMS; Shield RMSc; Shield SMS; Sig Romeo Zero;
This is for Colt models with the Elliason style adjustable rear sight.
Simply remove the rear sight on your gun and replace it with the EGW's mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions:
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) - Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
Warranty Information
- Material: 7075 Aluminum
- Coating: Matte Black Hardcoat
- Overall Length: 1.780"
- Overall Width: 1.1"
Mounting Hardware:
(2) 6-32 x 7/16" Flat Head Screws
(1) 6-40 x 3/8 Flat Head Screw
(1) 4-48 x 3/8 Flat Head Screw
