ASK AN EXPERTDescription
- 7075 Aluminum Construction
- Matte Black Hardcoat
- (2) 6-32 Flat Head Screws
- (1) 6-32 X 3/16 Set Screw
The EVOLUTION GUN WORKS Optima/JP Mount is made of 7075 Aluminum and has Matte Black Hardcoat finish. Simply remove the rear sight on your gun and replace it with this mount in order to mount your Trijicon RMR red dot. You can take this mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions:
- Remove the rear sight
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
Warranty Information
| Fitment | 1911s with a G.I. style rear sight cut Springfield 1911A1 Iver Johnson 1911A1 Iver Johnson 1911A1 9 Iver Johnson Falcon 45 Iver Johnson Thrasher 45 Iver Johnson Thrasher 9 Iver Johnson 1911A1 Chrome 38W Iver Johnson 1911A1 Chrome 38P Iver Johnson 1911A1 CHRW45 Iver Johnson 1911A1 CHR45P Iver Johnson 1911A1 CHR45WP Iver Johnson 1911A1 Zombie Iver Johnson 1911A1 Copperhead Iver Johnson 1911A1 Water Moccasin Iver Johnson 1911A1 Boa Iver Johnson 1911A1 Muddy Girl 9mm Iver Johnson 1911A1 Digital Navy Iver Johnson 1911A1 Digital Snow 45ACP |
| Material | 7075 Aluminum |
| Coating | Matte Black Hardcoat |
| Overall Length, in | 1.780" |
| Overall Width, in | 1.1" |
| Mounting Hardware | (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw |
| Red Dot Fitment | Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice |
