ASK AN EXPERTDescription
- 7075 Aluminum Construction
- Matte Black Hardcoat
- (2) 6-32 Button Head Screws
- (2) 6-32 Flat Head Screws
- (1) 6-32 Set Screw
The EVOLUTION GUN WORKS Vortex Viper/Venom Sight Mount is made of 7075 Aluminum and has Matte Black Hardcoat finish. The red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with the EGW's mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions:
- Remove the rear sight
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) - Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
Videos
View AllClose
Warranty Information
| Fits | Ruger MK I Ruger MK II Ruger MK III Ruger MK IV Ruger P85 Ruger P89 Ruger P90-95 Ruger P97 Ruger 22/45 |
| Material | 7075 Aluminum |
| Coating | Matte Black Hardcoat |
| Overall Length, in | 1.811" |
| Overall Width, in | .99" |
| Mounting Hardware | (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw |
| Red Dot Fitment | Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter, ADE RD3-001*, ADE RD3-02*, ADE RD3-009*, UTG Reflex Micro Dot, Sightmark Mini Shot Red Dots, Sightmark Core Shot Red Dots *All ADE mounts require 6-32 x 3/8" screws |
