FIX IT STICKS 15-65in Multi-Torque Driver Kit (FISMUTK)

Fix It Sticks All-in-One Torque Driver Kit

Featuring the Fix It Sticks All-in-One Torque Driver. Tighten down your scope rings, mounts, actions screws, etc. while in the field, at the range, or at home.  No more over or under tightening your critical components.  Lightweight and compact - the All-in-One Torque Driver Kit will always be there when you need it.

Kit includes:

• All-in-One Torque Driver (15 - 65 inch lbs);
• T-Way T-Handle Wrench;
• 15 different bits: T10, T15, T20, T25, [hex 3/32, 5/64, 1/8, 5/32, 3/16, 2.5mm, 3mm, 4mm, 5mm], P1, slotted #5;
• 1/2" Socket and 1/4" bit adapter set;
• Zippered case with Molded Holder.

Please note that the All-in-One Driver operates differently than our Torque Limiters.

All-in-one Torque Driver Instructions

Before use, confirm tool is at the "0" setting. The tool is factory calibrated and requires no adjustment before use. Do not attempt to adjust the collar - it is fixed in position by design.

1. Insert the All-in-one Torque Driver into any 1/4" drive handle.

2. Insert the appropriate bit for the fastener to be used.

3. Turning the drive handle clockwise, carefully tighten the fastener until the target torque mark on the collar aligns with the fixed mark on the end of the tool. Gently release pressure, and the torque driver will return to the "0" setting.

Note: Failure to follow these instructions may affect accuracy and/or damage the tool. Always follow manufacturer torque specifications to avoid damage to firearms and accessories