ASK AN EXPERTDescription
The GG&G EOTech XPS Series Lens Covers (1272) is still the only QD Lever System available today that does not add height to the EOTech optic. That's because this unique and innovative quick detach system retrofits directly to the body of the XPS. The Accucam QD Locking Lever System For The XPS replaces the EOTech socket head screw or thumbnut attachment method.
The Accucam system installs in approximately ten minutes. The only tools required are a 7/64" allen wrench and a torx head wrench which are both included in the kit. Weighing only two ounces, it is fully adjustable to fit Weaver and MIL-STD-1913 dovetails, even those that are worn or out of spec. Not recommended for .50 BMG or lightweight machine guns.
Once the Accucam is installed on the XPS, the sight can be quickly installed on a dovetail rail in seconds by rotating the Accucam Cam Lever to the locked position. It can then be quickly removed by rotating the Accucam Cam Lever to the unlocked position. In tests, the EOTech XPS Accucam Locking Lever System has shown to be repeatable to less than 1/2 MOA. The unique finger loop design is easily operated, even with a gloved hand and the rounded design is ergonomic and virtually snag-proof.
The Lens Covers For The XPS fit between the EOTech hood and the body of the EOTech housing. They are spring operated so that once pressure is applied to release them from the closed position, they spring open. The rear cover lays across the top, so as not to interfere with the field of view. The front cover opens and serves as a sun shield. Because of the contours of the EOTech housing, these covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
