ASK AN EXPERTDescription
- Two-stage AR trigger
- Minimal, user adjustable, 2 – 3 pound first stage
- Minimal second stage wall with a 1 1/2 pound weight
- Distinct wall between first and second stages allows for effective "prepping" of the trigger for added control
- Cam-Over Toggle Engine allows for lighter pull weights without losing hammer strike energy
- Soft Start Lock-Up aids in eliminating rifle “flinch” after the break for more accurate shots at distance
- Radical Sear Mechanics allow for the use of heavier hammer springs to aid in longevity and eliminating light primer strikes
- Tactile Weightless Break means there is no mushy over-travel after the break
- First stage slightly shorter than the MOD-1 design
- Same sear design as its MOD-2 counterpart, but a flat trigger bow with upgraded Black Nitride coating
The HIPERFIRE Xtreme 2 Stage Trigger Assembly delivers the same crisp pull and weightless break of Hiperfire single-stage triggers, but features a distinct wall between the first and second stages that allows you to "prep" the trigger for enhanced control.
Proudly made in America, the X2S allows you to adjust pull weight via 2 sets of springs, and features the Cam-Over Toggle Engine that reduces sear friction without sacrificing hammer strike power. During trigger pull, you're loading those toggle springs. At the point of trigger break, those springs propel the hammer forward with added "oomph." This allows the standard hammer spring to be ultra-light without the risk of light primer strikes.
Videos
View AllClose
Warranty Information
| Application | AR15, AR10, AR9/PCC variants (including Sig Sauer MPX) |
| Trigger Type | Two-Stage, Semi-Drop-In |
| 1st Stage | Minimal, 2 – 3 pound pull with green or red springs respectively |
| 2nd Stage | Minimal "wall", +1 1/2 pounds with either green or red springs |
| Total Pull Weight | 3 1/2 – 4 1/2 pounds with green or red springs respectively |
| User Adjustable | Yes |
| Trigger Bow | Flat with HIPERSHOE included |
| Finish | Black Nitride |
