ASK AN EXPERTDescription
- Low-rise aluminium clamping feedneck
- Quick-release back cap
- FL 3-way valve
- Lighter trigger return spring
- Aluminium single-finger flat trigger - adjustable back stop
- Super sleek GRN body and back cap
- Tool-less bolt removal
- POPS ASA
- 14.5" 2-piece Shaft 5 barrel - Cocker fast threads
- Single-piece frame and foregrip
The Etha3M Paintball Marker offers players a sleek, fresh approach to ergonomics with a host of notable performance upgrades. Its quick-release bolt assembly makes a huge difference to accessibility and maintenance which is typically found on much more expensive marker platforms. The aluminium low-rise feedneck reduces the overall profile of the marker. But it's the new aluminium trigger and mighty FL 3-way that makes a serious step forwards in terms of firepower. The lighter, more responsive and faster trigger cycling potential is jaw-dropping.
Features:
- Spool valve operation
- Gamma Core drivetrain
- Glass Reinforced Nylon outer composition
- 135psi operating pressure
- Soft-touch bolt with 3-stage bolt acceleration
- Valve chamber shut-off and breech sensing drivetrain
- Deftek offset feed
- Integrated SL4 inline regulator
- External velocity adjustment
- Tool-less wrap-around rubber grip
- Hoseless air-transfer system
- Operates with compressed air only
Videos
View AllClose
Warranty Information
| Materials | |
| Body | GRN Sports Shell with 6061 aluminium internal sleeve |
| Barrel | 6061-T6 Aluminium |
| Frame | GRN (Glass Reinforced Nylon) |
| Trigger | 6061-T6 aluminium |
| Breech Covers | GRN (Glass Reinforced Nylon) |
| Feed | 6061-T6 Aluminium |
| Hardware | |
| ASA Mount | AT POPS (Push On Purge System) |
| Trigger Method | Pivot trigger - Adjustable |
| Trigger Mechanism | Coil spring return |
| Trigger Pivot | Stainless Steel pin |
| Barrel | 2-Piece micro honed 14.5? (Shaft 4/5 compatible) |
| Feed Tube | Aluminium Clamping Lo-Rise Feed tube |
| Pneumatics | |
| Operating Principle | Spool Valve |
| Solenoid Type | FL 3-way valve |
| Drive Mechanism | Gamma Core |
| Bolt Mechanism | Spool Cure ST1 |
| Propellant | Compressed air only - Not CO2 compatible |
| Ergonomics | |
| Grip Type | Contoured dual density 2-piece grips with tool-less removal |
| Grip Pitch, in | 7.2" |
| Dimensions | |
| Length, in | 21.7" |
| Height, in | 8" |
| Width, in | 1.38" |
| Weight, lbs | 1.99 w/ Battery |
