Description
- Uses the same interchangeable bushings (.001" increments) as those used in Redding bushing style neck sizing dies
- Adjustable decapping rod allows you to adjust the bushing position, sizing only part of the neck length when desired
- Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case
- All Type S (except 17 and 20 cal) dies are supplied with both the standard size button and a decapping pin retainer
- Shellholder sold separately
- Made in the USA
The Redding Type S Bushing Full Length Die sizes the entire case while maintaining exact control of the case neck. It uses the same interchangeable bushings (sold separately) that are used in the Redding Bushing Style Neck Sizing Dies. Features an adjustable decapping rod that allows adjustment of the bushing position and a decapping pin retainer that enables neck sizing without the use of the size button for those who turn their case necks for uniformity.
Note: By removing the bushing and all internal parts, the Type S Full Length Bushing Die may also be used as a body die.
How to Determine Which Bushings You Need:
The easiest way to determine the proper diameter bushing, is to measure the neck diameter of several loaded or dummy cartridges with an accurate micrometer. Subtract .001"- .002" from the average neck diameter and this diameter bushing will generally size case necks to create the proper press fit for the bullet.
Another method is to measure the neck thickness with a ball micrometer or Redding's Case Neck Gauge. Double the wall thickness and add this number to the bullet diameter. The result is the neck diameter of a loaded cartridge, and bushing size can be determined as above.
