ASK AN EXPERTDescription
- Do not hit anything with this torque wrench or use it as a hammer
- Improperly calibrated torque wrench may cause damage to parts or tools
- Do not use extensions on the handle as it will damage this torque wrench
- To ensure accurate torque readings, please keep the torque wrench squared to the screw head
- Handle is not insulated, do not use this torque wrench on live electrical or high voltage circuits
Works with any 1/4" bit 10-90 in-lbs torque range. This is a precision instrument and should be handled and stored with care. Don't throw it or use a hammer with it. About Pro Torque Wrench operation:
Insert/Remove Bit
1. Insert the bit - Push the bit into Bi Holder to lock the bit into place.
2. Remove the bit - Pull up on the Bit Release Sleeve to release the bit.
Insert/Remove Socket
1. Insert the socket adapter - Push the socket adapter into the Bit Holder to lock the socket adapter into place.
2. Attach the socket to socket adapter - Push the socket onto the socket adapter.
3. Remove the socket - Pull up on the socket to release it from the socket adapter.
4. Remove the socket adapter - Pull up on the Bit Release Sleeve to remove the socket adapter. Pull up to release.
Warranty Information
| Includes: | |
| 8 Hex Bits | 9/64"; 5/32"; 3/16"; 2mm; 2.5mm; 3mm; 4mm; 5mm |
| 3 Torx Bits | Extended T-10; T-15; T-25 |
| 1 Slotted Bit | 10mm Wide |
| 1 Socket | 1/2" |
| 1 Socket Adapter | 1/4" Hex to 1/4" Square |
