ASK AN EXPERTDescription
- Everything required for a scope mounting project with professional results
- Fits any 1-inch or 30mm riflescope
The WHEELER Scope Mounting Kit Combo, 1 in / 30mm (545454) includes scope ring alignment bars, lapping compound, F.A.T. wrench, Thread locking compound, Scope ring lapping rod & handle, Level-Level-Level, 10 gunsmithing bits, Scope mounting DVD. The combo kit comes with 2 alignment bars, 2 lapping shafts one 1" and one 30mm. This kit for a scope mounting project.
The F.A.T. wrench features a thick ergonomic handle, a standard 1/4" drive tip, and can be used to apply torque from 10 to 65 in-lbs at 5 in-lb increments.
With proper care, the FAT Wrench will provide a lifetime of reliable service. Includes 9 bits and a square drive adapter. Includes a Leupold/Buehler windage bit, #11 flat blade, #10 flat blade, #32 flat blade, 5/32" Allen, 5/32" Allen, 3/32" Allen, T10 Torx, T15 Torx, T20 Torx, and a Square drive adapter bit.
The Alignment bars provide for perfect alignment of both rings and will also diagnose any misalignment problem. Lapping bar is used to lap the rings to improve alignment, reduce stress on the scope & improve grip.
The Level-Level-Level is simplest, most accurate scope leveling system. It gives you the means to level your scope perfectly in only minutes. Level your scope as you mount it on your rifle. Magnetic base in the rifle bridges the bolt raceway.
Warranty Information
| Kit Contains | Scope Ring Alignment Bars Scope Ring Lapping Rod Lapping Compound Level-Level-Level FAT Wrench with 10 Bits Thread Locking Compound |
