ASK AN EXPERTDescription
- Mounting Hardware is Included
- This Mount Fits: CZ P10C, CZ P10F
- This Mount Does Not Fit: CZ P10C Optics Ready, CZ P10F Optics Ready
Simply remove the rear sight on your gun and replace it with the Evolution Gun Works Trijicon RMR Sight Mount in order to mount your Trijicon RMR red-dot sight. You can take these Evolution Gun Works Red Dot Sight Mounts off and replace your rear sight at any time. Mounting hardware included.image
Installation Instructions: Remove the rear sight. Install the EGW Sight Mount in the dovetail. Tighten set screw (if applicable). Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight). Apply blue Loctite to the provided mounting screws. Torque mounting screws to 15in/lbs.
The screws that are included with this mount require a 5/64in allen wrench for installation.
Warranty Information
| Material | 7075 Aluminum |
| Coating | Matte Black Hardcoat |
| Overall Length | 1.780" |
| Overall Width | 1.1" |
| Mounting Hardware | (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw |
| Red Dot Fitment | Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice |
