ASK AN EXPERTDescription
- Bolt pattern on this mount will fit the Remington XP/XR 100 and the Remington 7
- Matte Black Finish
The bolt pattern on this mount will fit the Remington XP/XR 100 and the Remington 7.
The 3 hole mount is made for older versions with 3 holes. The 4 hole mount is for the newer versions with 4 holes.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.
The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.
Also, in many cases, it will not obstruct usage of factory iron sights.
EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
Add EGW's Practical or HD Scope Rings to make it a complete overhaul!
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
Installation:
EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
The 3 hole mount is made for older versions with 3 holes. The 4 hole mount is for the newer versions with 4 holes.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.
The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.
Also, in many cases, it will not obstruct usage of factory iron sights.
EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
Add EGW's Practical or HD Scope Rings to make it a complete overhaul!
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
Installation:
EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
Videos
View AllClose
Warranty Information
| Machined From | Domestic 6061 T6 Extruded Aluminum |
| Finish | Matte Black |
| Hardware | #6 T-10 Screws and T-10 Bit Included |
| Center Spread, in | 3.351" |
| Overall Length, in | 5.488" |
| Height, in | .4" |
