ASK AN EXPERTDescription
- Machined From Solid 7075 T6 Aircraft Grade Aluminum
- Finish:Â Matte Black Only
- Mounting Hardware: Socket Head Torx Screws and Wrench Provided
- Center Spread: 2.05"
- Overall Length of Mount:Â 5.488"
- This mount fits: Remington 4, 6, 7400, 750, 7600, 7615, Benelli Auto/Super Black Eagle/Vinchi, Weaver 93, Stoeger M3000, Stoeger M3500
- This base sits at approximately 0.4" high
- Center channel reduces overall mass of mount
- Compatible with Weaver or Picatinny rings
- Great choice for hunters and tactical shooters
EVOLUTION GUN WORKS SCOPE MOUNT
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.
Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
The mounts are machined in one of EGW’s USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
This mount comes with #8 screws. For installation EGW recommends 20 inch lbs of torque and a drip of blue Loctite.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.
Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
The mounts are machined in one of EGW’s USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
This mount comes with #8 screws. For installation EGW recommends 20 inch lbs of torque and a drip of blue Loctite.
Warranty Information
| Machined From | Solid 7075 T6 Aircraft Grade Aluminum |
| Finish | Matte Black |
| Mounting Hardware | Socket Head Torx Screws and Wrench Provided |
| Type of Mount | Remington 4, 6, 7400, 750, 7600, 7615, Benelli Auto/Super Black Eagle/Vinchi, Weaver 93, Stoeger M3000, Stoeger M3500 |
| Center Spread, in | 2.05" |
| Overall Length of Mount, in | 5.488" |
