ASK AN EXPERTDescription
- Anodized Silver Finish
- Picatinny rail compatible
- Domestic 6061 T6 Extruded Aluminum
- Mounting hardware included
- Compatible with Picatinny or Weaver scope rings
We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. These one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.
Installation: We recommend 20 inch lbs of torque and a drip of blue loctite.
We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards
When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.
Warranty Information
| Rail Type | One Piece Picatinny |
| Machined From | Domestic 6061 T6 Extruded Aluminum |
| Finish | Matte Silver Anodizing |
| Center Spread, in | 3.245" |
| Overall Length, in | 7.458" |
| Height, in | .4" (Top of Receiver to Top of Picatinny) |
| Quick Disconnect Ring Compatible | No |
| Ambidextrous | Yes |
| Torque Specs | 20 in/lbs |
| Mounting Hardware | #6-48 X 1/4 Screws and T-10 Bit Included |
| Weight | 2 oz. |
| Fits |
T3 Hunter T3 Laminated Stainless T3 Varmint T3 Super Varmint T3 Varmint Stainles T3 Compact Tactical T3x Superlite Camo T3x Superlite T3x Compact T3x Lite T3x Lite Stainless T3x Compact Tactical Rifle T3x Varmint T3x Laminated Stainless T3x Forest T3x Hunter Stainless T3x Hunter |
