ASK AN EXPERTDescription
- 7075 Aluminum Construction
- Black Hardcoat Anodized Type III
- (2) 6-32 Flat Head Screws
The EVOLUTION GUN WORKS Trijicon RMR/SRO, Holosun 407c/507c Adapter Mount for HK VP9 Optics is comparable to the HK #2 adapter plate, but is made in house from aluminum. Simply remove the plate on your HK VP9 Optics Ready or VP9L Optics Ready and replace it with EGW mount in order to mount your Trijicon RMR, SRO, Holosun 407c, 507c red-dot sight. You can take the mount off and replace your rear sight at any time. The hardware to install the red dot to EGW optics plate is included. They do not include the hardware to install the plate to the slide, but that can be purchased as an add-on.
Installation Instructions:
- Remove the rear sight
- Install the EGW sight mount and torque the mounting plate screws
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight) - Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
Warranty Information
| Fits | All HK VP9 Optics Ready Models HK VP9 Optics Ready HK VP9L Optics Ready HK VP9 Tactical Optics Ready |
| Material | 7075 Aluminum |
| Coating | Matte Black Hardcoat |
| Overall Length, in | 1.921" |
| Overall Width, in | .99" |
| Mounting Hardware | (2) 6-32 Flat Head Screws |
| Model | VP9 | VP9L Optics Ready |
| Red Dot Brand | Holosun 407C / 507C / 508T; Swampfox Kingslayer / Liberty / Justice; Trijicon RMR / SRO |
