ASK AN EXPERTDescription
- 7075 Aluminum Construction
- Matte Black Hardcoat Coating
- (2) 6-32 Flat Head Screws - Requires use of 5/64" Hex Key
- (2) M4-0.7 x 8mm Flat Head Cap Screws - for mounting the plate to the slide - Requires use of 2.5mm Hex Key
The EVOLUTION GUN WORKS Trijicon RMR/SRO Sight Mount is made of 7075 Aluminum and has Matte Black Hardcoat finish. This mount now comes with a set screw allowing it to be used with the friction fit dovetails.
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions:
- Remove the rear sight
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) - Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
Warranty Information
| Fits | Springfield Hellcat Optics Ready Springfield Hellcat Pro Optics Ready |
| Material | 7075 Aluminum |
| Coating | Matte Black Hardcoat |
| Overall Length, in | 1.780" |
| Overall Width, in | 1.1" |
| Mounting Hardware | (2) 6-32 Flat Head Screws (2) Flat Head Cap Screws |
| Red Dot Fitment | Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice |
