Description
- 7075 Aluminum Construction
- Black Hardcoat Anodized Type III
- 2 Flat Head Cap Screws
The EVOLUTION GUN WORKS Trijicon RMR Sight Mount is made of 7075 Aluminum and has Matte Black Hardcoat finish.
Simply remove the rear sight on your gun and replace it with this mount in order to mount your Trijicon RMR red dot. You can take this mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions:
- Remove the rear sight
- Install the EGW Sight Mount in the dovetail
- Install the EGW Sight Mount in place of the rear sight
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight) - Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
Warranty Information
Fits | Ruger MK I Ruger MK II Ruger MK III Ruger MK IV Ruger P85 Ruger P90-95 Ruger P97 Ruger 22/45 |
Material | 7075 Aluminum |
Coating | Matte Black Hardcoat |
Overall Length, in | 1.780" |
Overall Width, in | 1.1" |
Mounting Hardware | (2) 6-32 Flat Head Screws |
Model | Auto (Mk I, Mk II, MK III, Mk IV, P85, P89, P90-P95, P97, 22/45 |
Red Dot Brand | Holosun 407C / 507C / 508T; Swampfox Kingslayer / Liberty / Justice; Trijicon RMR / SRO |