ASK AN EXPERTDescription
- 7075 Aluminum Construction
- Black Hardcoat Anodized Type III
- (2) 6-32 Flat Head Screws
The EVOLUTION GUN WORKS Trijicon RMR Sight Mount for HK USP Compact is made of 7075 Aluminum and has Matte Black Hardcoat finish. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Trijicon RMR red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions:
- Remove the rear sight
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight) - Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
Warranty Information
| Fits | HK USP Compact |
| Material | 7075 Aluminum |
| Coating | Matte Black Hardcoat |
| Overall Length, in | 1.780" |
| Overall Width, in | 1.1" |
| Mounting Hardware | (2) 6-32 Flat Head Screws |
| Model | USP Compact |
| Red Dot Brand | Holosun 407C / 507C / 508T; Swampfox Kingslayer / Liberty / Justice; Trijicon RMR / SRO |
