ASK AN EXPERTDescription
- 7075 Aluminum Construction
- Matte Black Hardcoat Coating
- (2) 6-32 Flat Head Screws
- (1) 6-32 X 3/16 Set Screw
The EVOLUTION GUN WORKS Trijicon RMR/SRO Sight Mount is made of 7075 Aluminum and has Matte Black Hardcoat finish. This mount now comes with a set screw allowing it to be used with the friction fit dovetails.
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions:
- Remove the rear sight
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) - Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
Warranty Information
| Fits | Walther PPQ Classic (M 1) Walther PPQ M 2 (All models except optics ready and .22lr) Walther PPQ 45 Walther PPQ 45 SD Walther PPQ Sub Compact Walther P99 (All Models) Walther PPX (All Models) Walther Creed Walther Creed 10 Round Walther PPS (All Models) Walther PPS M 2 (All Models) |
| Material | 7075 Aluminum |
| Coating | Matte Black Hardcoat |
| Overall Length, in | 1.780" |
| Overall Width, in | 1.1" |
| Mounting Hardware | (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw |
| Red Dot Fitment | Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice |
