ASK AN EXPERTDescription
- A forward offset mount to give proper eye relief specifically for AR platform rifles
- Heavy duty for extreme use
- 1" ring diameter
- Dual steel locking lugs
- One-piece long clamp bar will not loosen or shift under heavy use or recoil
- 1/2" steel locking nuts
- Places the scope 1.415 above the top of the rifle allowing for the use of scopes with up to a 56mm objective
- Constructed from 6061 aluminum, hard coat anodized for a lifetime of service
- Torque cross bolts to 45 inch/pounds
- Torque ring cap screws to 25 inch/pounds
The Midwest Industries Gen2 1in Scope Mount has a forward offset to give proper eye relief for AR rifle platforms, and the one-piece clamp bar will not loosen or shift. The mount places the scope 1.50" above the top of the rifle, allowing for the use of scopes with up to a 56mm objective.
Warranty Information
| Ring Diameter, in | 1" |
| Overall Length, in | 5.875" |
| Width of rings, in | 0.85" |
| Distance between rings, in | 2.80" |
| Offset from the first ring, in | 1.40" |
| Distance - top of rail to center line of ring, in | 1.415" |
| Weight, oz | 8.1 |
