ASK AN EXPERTDescription
- Features a very unique way to bias the bullet into alignment with the cartridge case
- Micrometer is calibrated in .001" increments to simplify setting and recording bullet seating depth
- Slightly extended for full thread engagement of the lock ring
- Features an oversize bellmouth chamfer to ease case and bullet entry in progressive presses
This Redding Competition Bullet Seating Die features a very unique way to bias the bullet into alignment with the cartridge case. Align the bullet and cartridge case well in advance of bullet seating. This Patented System assures you of the best possible bullet alignment. Precise alignment is maintained as the bullet and cartridge case move upward until seating is accomplished.
The micrometer of this Redding Competition Bullet Seating Die is calibrated in .001" increments to simplify setting and recording bullet seating depth. Switching bullets and experimentation has never been easier. Competition shooters know that superior reloads are produced when bullet crimping is performed as a separate operation. So this no compromise die has no crimping capability. For a superior crimp get the Profile Crimp or Taper Crimp die.
The industry standard 7/8 -14 threaded die bodies are slightly extended for full thread engagement of the lock ring. Features an oversize bellmouth chamfer to ease case and bullet entry in progressive presses.
