Description
- Machined from billet 7075 T651 aluminum
- All aluminum parts are hardcoat anodized
- Torx 20 ring and clamping screws are zinc-nickel coated
- Rings are diagonally cut for increased visibility of the elevation and windage turrets
- 10-degree wedge included
- Picatinny mount for use on bolt action rifles
- Note: Will not fit the SAKO S20 or rifles with 2-piece rails. As of fall 2023, rear top covers will no longer feature alignment grooves.
The IDEAL SCOPE MOUNT SYSTEM series of mounts feature seven set of interfaces to attach any of more than 40 different accessories, and has a bubble level integrated in the rear plane of the mount body to prevent canting of the rifle. The rings are diagonally cut for increased visibility of the elevation and windage turrets (US Patent 8,733,011).
The mounts are machined from billet 7075 T651 aluminum and all aluminum parts are hardcoat anodized. The Torx 20 ring and clamping screws are zinc-nickel coated for corrosion resistance. The screws come pre-waxed from the factory to ensure proper torque values.
The mount is shipped complete with a manual and a "wedge" leveling key.
Note: The SP-5001 is designed for use on rifles with MIL-STD-1913 or STANAG 4694 rails, and is especially suitable for bolt action rifles with 1-piece Picatinny rails. The SP-5001 will fit most 35 mm scope tubes except for scopes with extended erector housings, such as the US Optics TPAL/EREK.
Warranty Information
Rings | 35 mm |
Tilt | 0 MIL / MOA |
Height | 30mm / 1.18in |
Length | 126mm / 4.96in |
Interfaces | 7 sets |
Weight | 239g / 8.4oz |