ASK AN EXPERTDescription
- Fits: Colt Rail Gun 1911 .22LR that has the Walther slide
- Material: 7075 Aluminum
- Coating: Matte Black Hardcoat
- Overall Length: 1.780"
- Overall Width: 1.1"
- Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw
- Red Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice
Machined from 7075 aluminum with a matte black hard-coat finish, this red dot mount is designed for the Colt 1911 Rail Gun with a Walther slide. This mount allows for the installation of popular red dot optics such as the Trijicon RMR and SRO, the Holosun 407C and 507C series, and the Swampfox Kingslayer, Liberty, and Justice. Upgrade your firearm with high-quality parts and accessories manufactured in the USA from EGW.
Simply remove the rear sight on your gun and replace it with EGW's mount in order to mount your Trijicon RMR red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions:
- Remove the rear sight
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
2 Flat Head Cap Screws - Provided for Trijicon RMR.
The screws that are included with this mount require a 5/64" allen wrench for installation.
