LEUPOLD VX-3i LRP 4.5-14x50mm FFP Riflescope with TMR Reticle (172338)

The VX-3i Long Range Precision riflescope delivers the lightweight performance long-range hunters and shooters demand. You get match-grade accuracy and repeatability, your choice of first or second focal plane reticles, and adjustments in MOA or Mils. Get behind the scope, and you’ll discover it’s made for shooting. The dials are easy to adjust and read from any shooting position. The throw lever is fast, smooth, and easy to use with gloved hands. Push your limits with a VX-3i LRP.

DIAMONDCOAT 2
Exterior lens surfaces are treated with DiamondCoat 2, an ion-assist lens coating, for higher light transmission and the greatest level of abrasion resistance we’ve ever offered. DiamondCoat 2 has the additional advantage of assisting in light transmission, for greater brightness, clarity and contrast, and will prove its worth in the wildest places on earth.

DUAL USE
All Leupold optics offer performance that makes them equally at home in hunting or tactical environments, thanks to their outstanding accuracy, legendary ruggedness, and absolute waterproof integrity.

SIDE FOCUS
Side focus parallax adjustment for fast, easy parallax focusing from any shooting position.

TWILIGHT MAX LIGHT MANAGEMENT SYSTEM
Light management means delivering usable light to your eye and forming a crisp, high contrasting image. Lens coatings are applied that maximize light transmission in blue and red, and balancing colors to develop the highest possible contrast. Glare is controlled with special mechanical structures. This means you can see antler tines in dark shadows long after the competition has gone home.

FRONT FOCAL PLANE (FFP)
The reticle magnifies along with the image, so you can estimate range at all magnification settings. These reticles are ideal in tactical situations, yet also provide greater accuracy of range estimation for hunters and target shooters.

THROW LEVER

Allows for near instant magnification changes.

FRONT FOCAL TMR RETICLE
Expands on existing Mil Dot reticle design
Utilizes hash marks instead of dots for increased ranging and hold-over precision
Provides aiming points for both wind and bullet drop compensation
1 MIL is approximately 3.6 inches at 100 yards
Hash marks are spaced .5 MILs apart, transitioning to .2 MIL spacing on the outer edges
Non-caliber specific
Front focal reticles enables full function of the holdovers throughout the whole magnification range
Mil based systems are the current military standard

TECHNICAL SPECIFICATIONS

Magnification	4.5-14x
Objective Diameter, mm	50
Field of View @ 100, ft	20.5-7.6
Eye Relief, in	4.41"-3.62"
Tube Diameter, mm	30
Reticle	TMR
Finish	Matte Black
Length, in	12.6"
Weight, oz	20.3