ASK AN EXPERTDescription
- Carbide die does not require the use of case lubricant to resize the brass
- The G-Rx die set comes packaged with a pusher rod which fits into the ram like a shell holder
- Kit includes: Carbide Sizing Die, Shellholder Pushrod
- An optional bottle (Product #471-996) and bottle adaptor (Product #789-703) are available
Redding G-Rx Carbide Base Sizing Die meets the need of the reloader needing to reload brass shot through some of the most popular autoloaders today.
These autoloaders, when fired, produce a bulge at the bottom of the brass, which normal sizing dies cannot reach and remove, rendering the brass unusable.
Simply push the brass through the sizing die and the bulge in the web of the brass is removed.
This step fully sizes the brass back within the accepted specification for brass diameter.
After the brass has been pushed through the die it may be resized in a standard sizing die allowing once unusable brass to be reloaded normally.
These autoloaders, when fired, produce a bulge at the bottom of the brass, which normal sizing dies cannot reach and remove, rendering the brass unusable.
Simply push the brass through the sizing die and the bulge in the web of the brass is removed.
This step fully sizes the brass back within the accepted specification for brass diameter.
After the brass has been pushed through the die it may be resized in a standard sizing die allowing once unusable brass to be reloaded normally.
