ASK AN EXPERTDescription
- 7075 Aluminum Construction
- Matte Black Hardcoat
- (2) 8-32 Button Head Screws
- (1) 8-32 Set Screw
The EVOLUTION GUN WORKS Vortex Razor Sight Mount is made of 7075 Aluminum and has Matte Black Hardcoat finish. Simply remove the rear sight on your gun and replace it with the mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions:
- Remove the rear sight
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) - Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
Videos
View AllClose
Warranty Information
| Fits | H&K VP9 H&K VP9SK H&K VP40 H&K P30 H&K P30L H&K P30SK H&K 45 H&K 45C |
| Material | 7075 Aluminum |
| Coating | Matte Black Hardcoat |
| Overall Length, in | 1.831" |
| Overall Width, in | 1.062" |
| Mounting Hardware | (2) 8-32 Button Head Screws, (1) 8-32 Set Screw |
| Red Dot Fitment | Vortex Razor, C-More STS, STS2 & RTS2 |
