ASK AN EXPERTDescription
- Works with any long action round back Savage rifle that is drilled for #8 screws
- Machined from Solid 7075 T6 Aircraft Grade Aluminum
- Compatible with Picatinny or Weaver scope rings
- Socket Head Torx Screws and Wrench Provided
- 4.63 in. Center Spread
- 7.458 in. Overall Length
- 20 MOA for shooting 500-1000 yards
- Matte Black Finish
EVOLUTION GUN WORKS HD SAVAGE LONG ACTION PICATINNY DRILLED FOR #8S SCOPE MOUNT
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002".
After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish.
The mounts are machined in one of EGW’s USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type III hard coat anodized for long lasting durability.The steel rails are Mil Spec parkerized for a durable rust resistant finish. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
This HD Savage base will work with any long action round back Savage rifle that is drilled for #8 screws. We supply T-10 #8-40 screws. The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger. Savages without an accu-trigger will require our flat back mount (listed separately). Our mount is drilled for and provided with 8-40 Torx Head screws. Some Long Action Savage guns (like the .338 Lapua or 110 BA) require 8-40 screws. This mount will work for the Savage 112.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002".
After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish.
The mounts are machined in one of EGW’s USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type III hard coat anodized for long lasting durability.The steel rails are Mil Spec parkerized for a durable rust resistant finish. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
This HD Savage base will work with any long action round back Savage rifle that is drilled for #8 screws. We supply T-10 #8-40 screws. The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger. Savages without an accu-trigger will require our flat back mount (listed separately). Our mount is drilled for and provided with 8-40 Torx Head screws. Some Long Action Savage guns (like the .338 Lapua or 110 BA) require 8-40 screws. This mount will work for the Savage 112.
