ASK AN EXPERTDescription
- Fits Long Action Remington 700 rifles (example 30-06, 300 Win Mag), as well as the 740 and 40x
- Will NOT fit your Howa 1500 or Weatherby Vanguard
- Machined from Domestic 6061 T6 Extruded Aluminum
- Comes standard with a bevel on both sides making it ambidextrous
- Hex head screws and wrench provided
- 4.485 in. Center Spread
- 7.064 in. Overall Length
- 0.395 in. Height
- 0 MOA for shooting 0-500 yards
- Matte Black Finish
This mount fits:
Remington 700 Long Action
Remington 721 Long Action
Remington 725 Long Action
Bergara B14 (#6 Screws)
Christensen Arms Long Action
Mauser M18
Sauer 100
Sauer 101
This base also fits the Bergara B-14 rilfes (#6 screws), Christensen arms long actions and Sauer 100 and 101
The Bergara Premier requires the base to be drilled out for #8 screws.
This mount comes standard with a bevel on both sides making it ambidextrous.
The bolt pattern on our Remington 700 Long Action mount fits Long Action Remington 700 rifles, as well as the 740 and 40x. Despite what you may have heard, the Remington 700 mount will NOT fit your Howa 1500 or Weatherby Vanguard.
The bolt pattern is similar, but the remainder of the mount (ejection port, length, etc.) renders it useless on these two guns.
The middle spread is the distance between the two middle holes, center to center, on your receiver.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.
The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.
Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
Add EGW's Practical or HD Scope Rings to make it a complete overhaul!
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
Installation:
EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
Remington 700 Long Action
Remington 721 Long Action
Remington 725 Long Action
Bergara B14 (#6 Screws)
Christensen Arms Long Action
Mauser M18
Sauer 100
Sauer 101
This base also fits the Bergara B-14 rilfes (#6 screws), Christensen arms long actions and Sauer 100 and 101
The Bergara Premier requires the base to be drilled out for #8 screws.
This mount comes standard with a bevel on both sides making it ambidextrous.
The bolt pattern on our Remington 700 Long Action mount fits Long Action Remington 700 rifles, as well as the 740 and 40x. Despite what you may have heard, the Remington 700 mount will NOT fit your Howa 1500 or Weatherby Vanguard.
The bolt pattern is similar, but the remainder of the mount (ejection port, length, etc.) renders it useless on these two guns.
The middle spread is the distance between the two middle holes, center to center, on your receiver.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.
The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.
Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
Add EGW's Practical or HD Scope Rings to make it a complete overhaul!
This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
Installation:
EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).
