ASK AN EXPERTDescription
- Construction from T6061 Aluminum, Hard Anodized black; Stainless steel springs and fasteners
- Picatinny Rail Mount interface by either standard machine screw fastener based clamp or optional ADM 170-S lever mount
- Non orientated leg positioning use either hand to move leg into any of the four leg positions
- Leg positions are stowed back, 90 degrees straight down, 45 degrees forward and stowed forward
- All 4 leg positions are solid allowing the shooter to load the bipod at the 45 and 90 degree positions
- Non orientated leg length adjustment, Outer leg slides on the Inner leg locating on any of five positions 3/4" apart and can be done by either hand
- Standard soft durable Rubber feet that are suitable for many surfaces
- Optional interchangeable Ski and Multi Spiked style feet can be swapped in the field with the press of a ball plunger with a bullet tip
- Optional mounting systems available for Accuracy International and Sako rifles
- Estimated range of elevation on the BT10 is 5-9" from the surface up to the rail
The BT10-LW17 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only.
MORE INFO
MORE INFO
- LW17: Lever Mount With ARMS 17S Mount
- UHMW components used for smooth tracking
- Preload on Pan and Cant can be tightened by means of the knurled knob
- Picatinny Rail Mount interface by either standard machine screw fastener based clamp or optional ARMS 17S lever mount
- Independent, intentional and non-orientated leg positioning allows either hand to move leg into any of the five leg positions
- Solid leg positions allows shooter to load the bipod at the 45 and 90 degree positions.
- Non-orientated leg length adjustment done by either hand: Outer leg slides on the Inner leg locating on any of five positions ?” apart
- Optional 3" Leg Extensions available for increasing height
- Standard soft, durable Rubber feet that are suitable for most surfaces
- Optional interchangeable Ski, Spike, Cleat and Spiked Cleat feet easily swapped in the field with the press of a stainless steel plunger with a bullet tip
- Optional mounting systems available for Accuracy International and Sako rifles
Warranty Information
- Height Range: 5 – 9.0" approximately
- Preloaded Pan: 30 degrees
- Preloaded Cant: 30 degrees
- 5 leg positions: 0, 45, 90, 135 and 180 degrees
- Weight: 12.7 oz
- Footprint: 8 – 11"
